Cleanliner Classic

Cleanliner Classic

Clean loading with minimum damage

Effective cleaning

The pickup system consists of a three-piece table with a pickup width of 8.00 m. The beet are picked up by finger drums and star drums and transported over four horizontal drums rotating in opposite directions to the middle of the machine, here they are transported on by six longitudinal conveying and cleaning drums. The order of these rollers has been designed in a new way to increase the efficiency of the Cleanliner Classic. Hydraulically adjustable skids are located on both sides for exact depth guidance of the pickup device. The side rakes are also hydraulically adjustable for optimum adaptation to the width of the heap. Stones stuck in the drums or other malfunctions are eliminated quickly and simply with the aid of the automatic reversing mechanism. The Cleanliner Classic picks up remaining beet with a special pick-up drum, whose three-dimensional motion is controlled by the multifunction level in the cab. The drums in the receiver ensure particularly effective cleaning in combination with the six longitudinal drums rotating in opposite directions. Any soil remaining on the beet is screened out by the elevator belts with corresponding drop stages. The screen belts are designed with widths of 80 cm, 90 cm, and 100 cm to ensure high performance at low conveying speeds, to prevent damage to the beet. The metering pusher above the longitudinal drums acts to decrease the flow of beet, when they are extremely dirty, to achieve better cleaning results. Moreover the metering pusher prevents „frozen beet“ i.e. clumps of beet and soil frozen together, from reaching the belts, thereby preventing damage to the conveyer belts.


The removed soil is spread evenly on the field surface by the soil distributor (see above), which makes the following field cultivation more easy.
On the pick-up there is a water spray device (see illustration on the right) which can be activated if required and which allows an even more careful cleaning of the beets.

Soil distributor

Water spray device (tank)

Water spray device (nozzles)

Perfect control

The Cleanliner Classic is equipped with three, high resolution infrared cameras as standard equipment. They supply images on the colour monitor in Split-Screen design in the cab, on which the exact depth guidance of the pickup table as well as the vehicle load can be observed.

Intelligent control

The Cleanliner Classic proves its superiority with its range of functions and intelligence. This is based on fact that an on-board computer is provided as a standard feature for precision control of the job computer on the specific machine operating assembly via a CAN bus. It is also possible to equip the Cleanliner Classic with a weighing scale. This serves for recording the momentary quantity of beet as well as the total quantity loaded. It determines remaining quantities very simply and helps avoid overloading the vehicle. A clear control panel with integrated terminal and multifunction level makes control of the machine simple and allows control of all primary functions „at a glance“. It is only necessary to press a few buttons to move the Cleanliner Classic to the transport or operating position or adjust the height of the pickup table, the feed or the speed of all drums and belts with the operating menu.